STEPCRAFT Assembly Questions
Z-Axis Alignment for STEPCRAFT D.Series Machines
The following videos will walk you through a typical Z-Axis Alignment…
Here is a video showing you how to do the cleaning and greasing procedure
An Example of an Aligned Stepcraft Machine
How to strength-test your Stepcraft CNC
Homing Each Axis
Speed Test
Alignment-z-axis
Z Axis Alignment – Disassembling the Z Axis
Z Axis Alignment – Setting the Z Axis Rollers
Z Axis Alignment – Lead Screw Nut Alignment
Z Axis Alignment – Inspecting Your Z Axis Stepper Motor
Z Axis Alignment – Reassembling Your Z Axis
Z Axis Alignment – Final Alignment and Testing
Y-Axis Alignment for STEPCRAFT D.Series Machines
Aligning your Y-Axis becomes much easier with our Y-Axis alignment support videos…
An Example of an Aligned Stepcraft Machine
How to strength-test your Stepcraft CNC
Homing Each Axis
Speed Test
Alignment-y-axis
Y Axis Alignment – Disassembling the Y Axis
Y Axis Alignment – Setting your Roller Tension
Y Axis Alignment – Aligning your Lead Screw Nut
Y Axis Alignment – Installing the Front Plate
Y Axis Alignment – Motion System Installation
Y Axis Alignment – Drive Belt Spacing and Installation
Y Axis Alignment – Checking Your Connections
Y Axis Alignment – Final Adjustment and Testing
Y Axis Alignment – Aligning Y manually
X-Axis Alignment for STEPCRAFT D.Series Machines
The following support videos will help walk you through aligning your X-Axis on a STEPCRAFT D.Series machine …
Here is a video showing you how to do the cleaning and greasing procedure
An Example of an Aligned Stepcraft Machine
How to strength-test your Stepcraft CNC
Homing Each Axis
Speed Test
Alignment-x-axis
X Axis Alignment – Disassembling the X Axis
X Axis Alignment – Setting the X Axis Rollers
X Axis Alignment – X Axis Lead Screw Nut Alignment
X Axis Alignment – Inspecting the X Axis Stepper Motor
X Axis Alignment – Reassembling the X Axis
X Axis Alignment – Final Adjustment and Testing
Why is My UCR201 Jog Pendant Not Showing Up In UCCNC?
The UCR201 Jog Pendant requires the user to enable the plugin in the configuration window in UCCNC. If you are running version 1.2037 of UCCNC, you may find that the Jog Pendant does not show up in the configuration window. If this is the case, you simply need to update UCCNC to a newer version which can be found below…
UCCNC Version 1.2049 – http://www.cncdrive.com/UCCNC/download_UCCNC.php
After downloading and installing version 1.2049 of UCCNC, the Jog Pendant should now be visible in the configuration window and you can proceed with the rest of the setup!
How do I tram my Stepcraft CNC system?
The process of tramming your CNC system is an easy, but critical step to getting the most accurate results. By tramming your Z axis, you are insuring that the spindle will not be tilted to one side or the other, creating an unwanted angle to any milled areas. Included below is a short PDF covering the basic procedure of tramming your Stepcraft CNC system. The same concept can be done using a dial indicator or machinist’s square for even greater accuracy.
How do I Test a Faulty Stepper Motor?
When troubleshooting a faulty stepper motor, it is important to be weary of incorrect or shorted wiring. While inspecting your connections and wires may be required, there is a simple process that can save you some time and effort when testing your system’s steppers. Included below is a short PDF that covers the signs of a damaged or shorting stepper motor, and how to quickly diagnose the issue.
How do I connect my Remote Switchable Power Controller?
To connect your remote switchable power controller system, follow the diagram below…
How come my STEPCRAFT CNC kit did not come with lubricant?
There is a very good chance that your kit DID come with lubricant but you skipped past it in the box. The white container for the lubricant blends well with the white styrofoam from the kit dividers. There is a round pocket that is specifically designed to hold the lubricant container. Please look for this. If you still can not find it, then email [email protected]
