How do I tram my Stepcraft?


How do I tram my Stepcraft CNC system?

The process of tramming your CNC system is an easy, but critical step to getting the most accurate results. By tramming your Z axis, you are insuring that the spindle will not be tilted to one side or the other, creating an unwanted angle to any milled areas. Included below is a short PDF covering the basic procedure of tramming your Stepcraft CNC system. The same concept can be done using a dial indicator or machinist’s square for even greater accuracy.

Tramming your Stepcraft CNC system

Categories: Maintenance, Spindles and Routers, STEPCRAFT Assembly Questions


Comments are closed.